Husqvarna 325iLK Workshop Manual page 13

5.3.5 To remove the coupling
1. Remove the 2 screws on the coupling.
2. Pull the coupling from the shaft.
5.3.6 To install the coupling
1. Put the coupling on the shaft.
2. Install the 2 screws on the coupling.
726 - 002 - 23.01.2020
3. Tighten the screws 2 times in the sequence shown
in the illustration.
2 1
4 3
4. Install the shaft. Refer to
11 .
To install the shaft on page
Repair instructions - 13