Table of Contents
Advertisement
Installation
Installation
Pressure Relief
Follow the Pressure Relief Procedure whenever
you see this symbol.
This equipment stays pressurized until pressure is
manually relieved. To help prevent serious injury from
pressurized fluid, such as skin injection, splashing
fluid and moving parts, follow the Pressure Relief
Procedure when you stop dispensing and before
cleaning, checking, or servicing the equipment.
To relieve pressure in the system, use two wrenches
working in opposite directions on pump outlet fitting to
slowly loosen fitting only until fitting is loose and no
more lubricant or air is leaking from fitting as shown in
F
. 2.
IG
F
. 2
IG
COMPONENT RUPTURE HAZARD
The maximum working pressure of each component
in the system may not be the same. To reduce the
risk of overpressurizing any component in the sys-
tem, be sure you know the maximum working pres-
sure of each component. Never exceed the maximum
working pressure of the lowest rated component in
the system. Overpressurizing any component can
result in rupture, fire, explosion, property damage and
serious injury.
6
•
Read and follow instructions supplied with each sys-
tem component.
•
Reference letters used in the following Installation
instructions, refer to Typical Installation Key, page 5.
Wiring
Grounding
The equipment must be bonded (grounded) directly
to the truck. Grounding reduces the risk of static
shock due to static build up on the equipment.
System Configuration and Wiring
NOTE: Cable wiring harness kits are available from
Graco. See Parts page 11 for a complete list of available
kits.
Fuses
NOTICE
Fuses (user supplied) are required on all models. To
avoid equipment damage:
•
Never operate the Dyna-Star Pump models with-
out a fuse installed.
•
A fuse of the correct voltage and amperage must
be installed in line with the power entry to the
system. Graco recommends using 35A fuses.
Reservoir Installation
HEAVY EQUIPMENT HAZARD
Equipment is heavy. To avoid injury:
• Be sure unit is securely mounted before operation.
• Do not lift pressurized equipment.
• Lifting or moving heavy equipment incorrectly can
cause serious injury. To avoid serious injuries, such
as muscle strain or back injuries, when moving
pump always use a lifting aid secured to the pump
lift ring. See Technical Data, in the pump
instruction manual for pump weight.
332540B
Advertisement
Table of Contents
