Festo MH1 Series Brief Description page 15

1 User
The miniature valves type MH1..−PCB are intended exclus
ively for controlling pneumatic actuators. When used to
gether with commercially available components, such as
actuators, the specified limits for pressures, temperatures,
electrical data, torques etc. must be observed. National
and local safety regulations must also be observed.
Miniature valves may only be fitted by trained personnel.
Warning
S Before undertaking installation or maintenance work,
switch off the power supply for the valve solenoid
coils and the compressed air supply.
Please note
Commission only a miniature valve terminal which has
been fitted and wired completely.
0603a
Festo MH1..−PCB
instructionsEnglish
English
15