Acceptance Test Reports; Ambient Conditions; Reporting Problems And Failures Related To Safety Functions; Related Standards And Directives - ABB ACS880 Series User Manual

• you must document all acceptance tests
• you must sign and store the acceptance test report for further reference.

Acceptance test reports

You must store the signed acceptance test reports in the logbook of the machine and in the
explosion protection document under the scope of the ATEX User Directive 1999/92/EC.
The report must include, as required by the referred standards:
• a description of the safety application (including a figure)
• a description and revisions of safety components that are used in the safety application
• a list of all safety functions that are used in the safety application
• a list of all safety-related parameters and their values
• documentation of start-up activities, references to failure reports and resolution of failures
• the test results for each safety function, checksums, date of the tests, and confirmation
by the test personnel.
You must store any new acceptance test reports performed due to changes or maintenance
in the logbook of the machine and in the explosion protection document under the scope
of the ATEX User Directive 1999/92/EC.
￭

Ambient conditions

For the environmental limits for the safety functions and the drive, refer to the hardware
manual.
￭

Reporting problems and failures related to safety functions

Contact ABB.

Related standards and directives

EN 50495:2010
IEC 61508:2010
EN 61800-5-2:2007
IEC 61800-5-2:2016
IEC 61511-1:2016
2014/34/EU
Safety devices required for the safe functioning of equipment with respect to explo-
sion risks
Functional safety of electrical/electronic/programmable electronic safety-related
systems.
Part 1 – General Requirements
Part 2 – Requirements for electrical/electronic/programmable electronic safety-re-
lated systems
Adjustable speed electrical power drive systems – Part 5-2: Safety requirements
– Functional
Functional safety – Safety instrumented systems for the process industry sector –
Part 1:Framework, definitions, system, hardware and application programming re-
quirements
European ATEX Product Directive
Technical data 63