AEG BSE792320B User Manual page 25

Food category: casserole
1. Activate the appliance.
2. Place half of the ingredients in a
baking dish.
3. Insert the tip of the food sensor
exactly in the centre of the casserole.
The food sensor should be stabilized
in one place during baking. Use a
solid ingredient to achieve that. Use
the rim of the baking dish to support
the silicone handle of the food
sensor. The tip of the food sensor
should not touch the bottom of a
baking dish.
4. Cover the food sensor with the
remaining ingredients.
5. Put the plug of the food sensor into
the socket located in the front frame
of the appliance.
The display shows the food sensor
symbol.
6. Press or
seconds to set the food core
temperature.
in less than 5
7. Set a heating function and, if
necessary, the oven temperature.
8. To change the food core
temperature, press
When the dish is at the set temperature,
an acoustic signal sounds. The appliance
deactivates automatically.
9. Touch any symbol to stop the signal.
10. Remove the food sensor plug from
the socket and remove the dish from
the appliance.
WARNING!
There is a risk of burns as the
food sensor becomes hot.
Be careful when you unplug
it and remove it from the
food.
9.2 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support .
Baking tray/ Deep pan:
Push the baking tray / deep pan between
the guide bars of the shelf support.
Wire shelf and baking tray / deep pan
together:
ENGLISH 25
.