AEG BSE792320B User Manual page 60

Hide thumbs Also See for BSE792320B:
Table of Contents

Advertisement

60
www.aeg.com
Problem
Water comes out of the wa-
ter drawer after you carry it
or put it inside the appli-
ance.
Water comes out of the wa-
ter drawer after you carry it
or put it inside the appli-
ance.
The appliance does not re-
tain the water drawer after
you push it on the cover.
The water drawer is difficult
to clean.
The descaling procedure is
interrupted before it finishes.
The descaling procedure is
interrupted before it finishes.
There is no water inside the
grill- / roasting pan after the
descaling procedure.
There is dirty water on the
bottom of the cavity after
the descaling cycle.
The cleaning function is in-
terrupted before it finishes.
The cleaning function is in-
terrupted before it finishes.
There is too much water on
the bottom of the cavity af-
ter the end of the cleaning
function.
There is no good perform-
ance of the cleaning proce-
dure.
Possible cause
You did not assemble the lid
of the water drawer correct-
ly.
You did not assemble the
wave-breaker correctly.
You did not fully press the
water drawer body.
You did not remove the lid
and the wave-breaker.
There was a power cut.
The function was stopped by
the user.
You did not fill the water
drawer to the maximum lev-
el.
The grill- / roasting pan is on
a wrong shelf position.
There was a power cut.
The function was stopped by
the user.
You sprayed too much de-
tergent in the appliance be-
fore the activation of the
cleaning cycle.
The initial oven cavity tem-
perature of the steam clean-
ing function was too high.
Remedy
Assemble the lid of the wa-
ter drawer correctly.
Assemble the wave-breaker
in the body of the water
drawer correctly.
Insert the water drawer body
in the appliance by pushing
it until it reaches to the end.
Refer to "Cleaning the water
drawer".
Repeat the procedure.
Repeat the procedure.
Check if the a descaling
agent / water is present in
the water drawer body.
Repeat the procedure.
Remove the residual water
and the descaling agent
from the bottom of the
oven. Put the grill- / roasting
pan on the first shelf posi-
tion.
Repeat the procedure.
Repeat the procedure.
Cover all parts of the cavity
with a thin layer of the deter-
gent. Spray the detergent
evenly.
Repeat the cycle. Run the cy-
cle when the appliance is
cold.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents