Reassemble Valve - Culligan CTM Series Installation, Operation, And Service Instructions With Parts Lists

Reassemble Valve

1. Lubricate
T-Seal
Flow Port
CAUTION! Do not rock the valve core onto the tank adapter, just place it straight down. Rocking
may cause damage to the o-rings.
2. Be certain o-rings are
all in place on the tank
adapter before mating
with the valve body.
58 Culligan® Culligan Top Mount (CTM) Water Softeners
Figure 70.
NOTE Remove excess water from the tank adapter to prevent o-ring(s)
from floating during attachment with the valve body.
Figure 71.
58 Cat. No. 01029401