Mount The Valve - Culligan CTM Series Installation, Operation, And Service Instructions With Parts Lists

Mount the Valve

NOTE For 24" Aqua-Sensor ported
tanks, replace o-ring included
with the valve with the thicker
o-ring provided with the
system.
1. Position large o-ring above threads.
Do not lubricate o-ring.
3.
CAUTION!
Cat. No. 01029401
2. Lubricate small o-ring
Attach upper disperser by snap-
ping into the slots in the tank
adapter. Making sure, that it is
secured.
Do Not Overtighten!
4.
NOTE
Figure 7.
Twist the valve onto the
tank, counterclockwise
to the thread start. Twist
clockwise, handtight, until
the large o-ring is fully com-
pressed in the tank.
Tank may need to be rotated for
preferred positioning.
Installation 9