Attach Tank Adapter (30” And 36” Tanks Only); Aqua-Sensor Ported Tanks; Non-Ported Tanks - Culligan CTM Series Installation, Operation, And Service Instructions With Parts Lists

Attach Tank Adapter (30" and 36" Tanks Only)

Aqua-Sensor Ported Tanks

Fasten the 12 bolts in the squence indicated below. Once all of the bolts have been tightened, complete a second pass to
ensure all of the bolts are secure.
NOTE Replace o-ring included with the valve with the
thicker o-ring provided in the tank adapter kit.
Bolt
Do not lubricate o-ring with anything, but water.
Washer
Washer
Lock Nut
Nut

Non-Ported Tanks

8 Culligan® Culligan Top Mount (CTM) Water Softeners
8
4
Place o-ring into the
underside of the flange.
Do not lubricate o-ring.
10
Top of Tank
Figure 5.
NOTE
Twist the tank adapter onto the tank, counterclockwise to the
thread start. Twist clockwise, handtight, until the large o-ring
provided with the adapter is fully compressed in the tank.
Position the o-ring above the threads. Do not lubricate o-ring.
Figure 6.
1
12
6
2
Use the o-ring included with the valve.
8
5
9
3
7
11
Cat. No. 01029401