Safety Instructions
2.4
Notice on safety during operations
Basic safety rules must be followed in order to ensure that the end product can be continually op-
erated in a safe manner. These rules must be observed while using the end product and while in-
stalling the drive.
These rules and safety measures can be categorized as follows:
• Construction measures before the installation (refer to the "Safety notices to observe during in-
stallation" section in Chapter "Installation").
• Safety fundamentals during the drive installation and during cable and wire routing (refer to the
"Safety notices to observe during installation" section in the "Installation" chapter).
• Using the drive in intermittent duty (refer to the "General information" section in the "Operating
Notes" chapter).
• Basic safety rules during operation (refer to the "General information" Chapter).
• The creation of a manual for the end product which contains these and other safety rules.
Creating a user's manual
The manufacturer of the end product must create a manual for the users of that product. The safety
notices in the end-product manual must be written based on the end product's risk assessment.
10
DUOMAT 3 CARE EASY
78668(-)