Table of Contents
Advertisement
DUOMAT 3 CARE EASY
6.
Installation
6.1
Safety notices to observe during installation
Basic safety rules must be followed in order to ensure that the end product can be continually op-
erated in a safe manner. These rules must be observed while using the end product and while in-
stalling the drive.
6.1.1
Ensuring operational reliability during installation
The safety and reliability of the end product containing the DewertOkin drive can be ensured by us-
ing the proper construction methods described below.
Avoiding fatigue fractures
Drives that are incorrectly installed can undergo fatigue fractures which then create a
risk of injury.
• Install the drive in the end product so that it is properly aligned. This will help pre-
• Do not position the drive at a slanted angle when installing it in the end product. A
Avoiding a pinching hazard
When designing your end product, you should take the drive adjustment movement
into account with passive safety mechanisms and with the appropriate safety notices in
your operating instructions.
• Installation methods for ensuring passive safety: Install the DUOMAT 3 CARE
When preparing safety notices for the operator, be sure that your operating instructions inform the
user of these points.
78668(-)
CAUTION
vent shear stress.
slanted angle between the intended direction of movement of the end product and
the drive's direction will create shear stress and could lead to a fatigue fracture.
CAUTION
EASY so that none of the positions where shear and pinch hazards exist are acces-
sible externally.
Installation
17
Advertisement
Table of Contents
