Table of Contents
Advertisement
In accordance with EN 60601-2-52:2010, "Particular requirements for the safety and essential per-
formance of medical beds", the following standards have been used (refer to the ratings plate for
label
):
EN 60601-2-52, Section 201.6.2
EN 60601-2-52, Section 201.7.6.3
EN 60601-2-52, Section 201.9.2.2.5
EN 60601-2-52, Section 201.9.2.3.1
EN 60601-2-52, Section 201.9.8.3.2
EN 60601-2-52, Section 201.11.1.1
EN 60601-2-52, Section 201.11.6.5.101
EN 60601-2-52, Section 201.11.8
EN 60601-2-52, Section 201.13.1.4
EN 60601-2-52, Section 201.15.3.4.1
EN 60601-2-52, Section 201.15.4.4
EN 60601-2-52, Section BB.3.3.3
EN 60601-2-52, Section BB.3.4.1
Protection against electrical shock: Protection class
II
Control panel symbols (depending on model, cus-
tomer requirements)
Operating device with automatic reset function (e.g.
IPROXX)
Unintentional movement:
Prevented by means of a locking mechanism (such
as Control box, Supervisor, IPROXX
®
IPROXX
, or Meditouch)
Static load
Temperatures
Waterproof protection
Loss of power:
e.g. use of a battery, depending on customer re-
quirements
Special mechanical risks, depending on customer
requirements:
Prevented by means of a locking mechanism (such
as Control box, Supervisor, IPROXX
®
IPROXX
, or Meditouch)
Mechanical strength – handset (e.g. IPROXX)
Displays: Ready indicator is not required
Dimensions (depending on version and customer
requirements) – handset (e.g. IPROXX)
Operational forces – handset (e.g. IPROXX)
®
SE,
®
SE,
Advertisement
Table of Contents
