Table of Contents
Advertisement
Operating Notes
7.2
Notice for operating with optional configuration
7.2.1
Optional: battery-operated reset function
The battery-operated reset function allows the drive system to be operated during a power outage.
One or two 9-V batteries can be used to power the DUOMAT 3 CARE EASY in the event of a
power outage. The batteries should only be connected when a power cut occurs. The batteries are
not connected by default since they have limited capacity. They can only be used to power the re-
set function once. The used batteries should then be replaced and properly disposed of.
The battery-operated reset function is not a safety system and does not avert danger.
Connect the nine-volt batteries first when you would like to perform a battery-operated
reset. The batteries may only be used to power the reset function one time. Take out
the batteries and dispose of them properly after the reset function has been carried out.
If the end product is under a heavy load which prevents the reset function from operating, the
strain or load on the end product must first be removed before a reset can be carried out.
Connecting the nine-volt batteries
Figure 12
A 9-V battery (type 6LR61)
C Battery clip connected,
26
CAUTION
CAUTION
A
B
Connecting the 9-V batteries
A
C
D
B Battery clip
D Battery compartment
DUOMAT 3 CARE EASY
B
78668(-)
Advertisement
Table of Contents
