fantastic furniture HAVANA Manual
Coffee table rectangle
Hide thumbs
Also See for HAVANA:
- Assembly instructions manual (16 pages) ,
- Manual (16 pages) ,
- Manual (6 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for fantastic furniture HAVANA
Summary of Contents for fantastic furniture HAVANA
- Page 1 Version 1.1 HAVANA Coffee Table Rectangle www.fantasticfurniture.com.au...
- Page 2 Enjoy Your purchase from Australia’s Best Value Furniture Store www.fantasticfurniture.com.au PAGE 2...
-
Page 3: Assembly Checklist
Assembly checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Identify and lay out all of the components Unless instructed, do not fully tighten screws before you begin assembly. until the item is fully assembled. -
Page 4: What You Need
What you need to assemble the product Top Panel (P1) (P4) Divider (P3) (P4) DO NOT USE Divider Other tools you need (P3) Flat head screwdriver; Phillips head screwdriver; Hammer Bottom Panel (P4) (P2) (P4) Support (P10) Parts list Box 1: Top Panel (P1); Bottom Panel (P2); Drawer Back Right Drawer Divider (P3);... - Page 5 Step 1 You will need 12 x Cam Bolts Phillips head (H3) screwdriver (P4) (P1) Attach 8 x Cam Bolts (H3) into Top Panel (P1). Attach 1 x Cam Bolts (H3) into Leg (P4). Repeat this step for the rest of 3 x Legs (P4). Tighten Cam Bolts using a Phillips head screwdriver.
- Page 6 Step 4 (P4) You will need (P4) 4 x Dowels 2 x Cam Nuts (H1) (H4) Flat head screwdriver This is how a cam nut works ..(P2) The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt.
- Page 7 Step 6 (P1) You will need 8 x Dowels 4 x Small (H1) Dowels (H2) 8 x Cam Nuts Flat head (H4) screwdriver (P4) (P3) (P4) (P4) Insert 8 x Dowels (H1) into Legs (P4). Insert 4 x Small Dowels (H2) into Dividers (P3). Insert 8 x Cam Nuts (H4) into the holes of Dividers (P3) and Legs (P4).
- Page 8 Step 8 This is how a cam nut works ..(P6) The head of the cam You will need bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt. (P7) Flat head 4 x Small Cam...
- Page 9 (P6) Step 11 You will need (P7) 1 x DL Runner 1 x DR Runner (H8) (H9) 4 x Small Phillips head Screws (H5) screwdriver Attach 1 x DL Runner (H8) to the bottom of Left Drawer Side (P6) and 1 x DR Runner (H9) to the bottom of Right Drawer Side (P7) with 4 x Small Screws (H5).
-
Page 10: Job Complete
Step 14 Put the drawers into the table. Step 15 Recommended weight capacity : 80KG. Job Complete! In the interest of our environment please dispose of all packaging thoughtfully. www.fantasticfurniture.com.au PAGE 10...