Panel Explanation; Vigor2927L - Draytek Vigor2927 Series Quick Start Manual

2 . P a n e l E
2 . P a n e l E
2 . 1 V i g o r 2
2 . 1 V i g o r 2
No. LED
ACT
WAN2/WAN1
LTE
(1)
DMZ
USB
QoS
VPN
WCF
(2) WAN1,WAN2 / P6
Left LED
Right LED
x p l a n a t i o
x p l a n a t i o
9 2 7 L
9 2 7 L
Status
Off
Blinking
On
Off
Blinking
On
Off
Blinking
On
Off
Blinking
On
Off
Blinking
On
Off
On
Off
Blinking
On
Off
On
Off
Blinking
On
Off
n
n
Explanation
The router is powered off.
The router is powered on and running
normally.
Internet connection is ready.
Internet connection is not ready.
The data is transmitting.
LTE device is connected and ready for use.
LTE device is not detected, or has serious
problem (e.g., no SIM card, SIM pin error, SIM
deactivated, and etc.).
Slowly: LTE device is in dialing up.
Quickly: The data is transmitting.
The DMZ function is enabled.
The DMZ function is disabled.
The data is transmitting.
USB device is connected and ready for use.
No USB device is connected.
The data is transmitting.
The QoS function is active.
The QoS function is inactive.
The VPN tunnel is active.
VPN services are disabled
Traffic is passing through VPN tunnel.
The Web Content Filter is active. (It is enabled
from Firewall >> General Setup).
WCF is disabled.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps.
2