Draytek Vigor2927 Series Quick Start Manual page 11

QoS
(1)
5G / 2.4G
WAN1,WAN2 / P6
Left LED
Right LED
(2)
LAN P1-P5
Left LED
Right LED
On The QoS function is active.
Off The QoS function is inactive.
5G / 2.4G: Wireless access point with
bandwidth of 5GHz/2.4GHz is ready.
On
WLAN: Wireless access point is ready.
Off Wireless function is disabled.
It will blink slowly while wireless traffic goes
through.
ACT and WLAN LEDs blink quickly and
Blinking
simultaneously when WPS is working, and will
return to normal condition after two minutes.
(You need to setup WPS within 2 minutes.)
On The port is connected.
Off The port is disconnected.
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
Off The port is connected with 10/100Mbps.
On The port is connected.
Off The port is disconnected.
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
Off The port is connected with 10/100Mbps
5