Draytek Vigor2927 Series Quick Start Manual page 9

LAN P1-P5
Left LED
Right LED
No.
Interface
Factory
(3)
Reset
(4) USB
WAN1
(5)
WAN2 / P6
LAN P1-P5
PWR
(6)
ON/OFF
(7)
(8) SIM 2/ SIM 1
On The port is connected.
Off The port is disconnected.
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
Off The port is connected with 10/100Mbps
Description
Restore the default settings. Usage: Turn on the router
(ACT LED is blinking). Press the hole and keep for more than
5 seconds. When you see the ACT LED begins to blink rapidly
than usual, release the button. Then the router will restart
with the factory default configuration.
Connecter for a USB device (for 3G/4G USB Modem or
printer or thermometer).
Connecter for local network devices or modem for
accessing Internet.
Connecter for local network devices or modem for
accessing Internet.
It is a switchable port. It can be used for LAN connection or
WAN connection according to the settings configured in
WUI.
Connecters for local network devices.
Connecter for a power adapter.
Power Switch.
Connecter for installing LTE antennas.
Slots for installing SIM card.
3