Draytek Vigor2927 Series Quick Start Manual page 14

2 . 3 V i g o r 2 9
2 . 3 V i g o r 2 9
No. LED
ACT
WAN2/WAN1
QoS
USB
(1)
Phone1/
Phone2
2.4G/5G
(2)
WAN1,WAN2 / P6
Left LED
Right LED
2 7 V a c
2 7 V a c
Status
Off
Blinking
On
Off
Blinking
On
Off
On
Off
Blinking
On
Off
Blinking
On
Off
Blinking
On
Off
Blinking
On
Off
Explanation
The router is powered off.
The router is powered on and running
normally.
Internet connection is ready.
Internet connection is not ready.
The data is transmitting.
The QoS function is active.
The QoS function is inactive.
USB device is connected and ready for use.
No USB device is connected.
The data is transmitting.
The phone connected to this port is off-hook.
The phone connected to this port is on-hook.
A phone call comes.
5G / 2.4G: Wireless access point with
bandwidth of 5GHz/2.4GHz is ready.
WLAN: Wireless access point is ready.
Wireless function is disabled.
It will blink slowly while wireless traffic goes
through.
ACT and WLAN LEDs blink quickly and
simultaneously when WPS is working, and will
return to normal condition after two minutes.
(You need to setup WPS within 2 minutes.)
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps.
8