Agilent Technologies 4284A Service Manual page 4

HP 4284A
Precision LCR Meter
This supplement contains information for correcting manual errors and for adapting the manual to newer Instruments that contain Improvements
or modifications not documented in the existing manual.
1.
To use this supplement
2.
Make all ERRATA corrections
Make all appropriate serlal-number-related changes listed below
SERIAL PREFIX OR NUMBER
2940J01172
and above
2848J00388
and above
New Item
�
� ERRATA
Page 3-3, Figure 3-1. Assembly Identification (1/2):
Exchange the assembly labels A40 and A50.
(In HP 4284A, A40 is on the right of A50)
Page 3-14, Table 3-7_ Rear Panel Components:
See Parts Information Table at the end of this supplement.
Page 3-37, Table 3-12_ Bit Switch Selected Self Test:
Correct Bit Switch No. 5 setting as shown next.
Manual change supplements are revised as often as necessary to keep manuals as current and accurate as possible. Hewlett-Packard recommends
that you periodically request the latest edition of this supplement. Free copies are available from all HP offices. When requesting copies, quote
the manual identification Information from your supplement, or the model number and print date from the title. page of the manual.
Date/Div: March 1, 1990/33
Page: 1 of 5
PRINTED IN JAPAN
MAKE MANUAL CHANGES
1
2
NOTE
MANUAL
MANUAL IDENTIFICATION
Model Number: HP 4284A
Date Printed: January 1989
Part Number: 04284-90100
SERIAL PREFIX OR NUMBER
��1
FI!!!: :J 2
� 3
I!!!: :J 4
!iii i!:=J 5
!iii i!:=J 6
�7
� 8
NO . 5
CHANGES
MAKE MANUAL CHANGES
HEWL.ETT
PACK ARD