Brickcom MD-100A Series Quick Installation Manual page 6

3. Hardware Installation
WARNING: Do not mount the camera on a soft material. The camera may
fall and be damaged.
1. Use the enclosed Allen key to detach the dome cover from the camera
device.
2. Remove the dry bag from its package. Use the double-sided tape to
stick the dry bag onto the designate position inside of the dome cover.
3. Choose the location on the wall or ceiling to place the camera. Attach the
location sticker to the desired spot. For ceiling installation, the best place
to mount the camera is into a ceiling stud.
4. Drill three holes through the center of the three location holes on the
sticker.