Brickcom MD-100A Series Quick Installation Manual page 17

6. If the camera supports the EasyLink
page will be displayed. Otherwise, this page will not be shown.
*If desired, click <Skip> to skip this setting.
EasyLink is a unique Brickcom function which allows users to assign a unique
TM
domain name to their network camera's IP address. There is no need to
configure the router to open up ports or remember hard-to-memorize IP
addresses. When
[uniquedomainname].mybrickcom.com to view the camera's web GUI and live
view.
 Check the option box to enable EasyLink
length must be between 5-32 characters.
 For Refresh Time, select a desired amount of time from the drop-down
menu to confirm the connection status.
 When finished, click the arrow button to continue.
this feature is enabled,
TM
function, the following
users can log onto
. Enter a domain name whose
TM