Table of Contents
Advertisement
Calibration on E3G080
5.2.1
Status indication on E3G080
Function In-/Output
Sector valve delayed
Main valve non-delayed
Horn
Illuminated warning panel
Manual actuation
(spec. button yellow)
Emergency stop-/
Blocking key
Loss of extinguishing agent
Extinguishing blocked
Extinguishing released
14
Building Technologies
Fire Safety
Each pending fault signal is visible approx. 4 sec. (sequential display)
LED
'H1'
'H2'
'H3'
'H4'
The LEDs marked by black spots stand for the in /output concerned; e.g. control line Extinguishing
released -> LED 'H1' + 'H4' flash or light up simultaneously
When an extinguishing command has missed prior to the calibration and has
IMPORTANT
been reported as faulty, this fault is deleted afterwards.
De-activated
Short circuit
continuously on
rapid flashing
Open line
slow flashing
009853_b_en_--
01.2013
Advertisement
Table of Contents
