Advertisement
September 2020
configuration options for the Field and Host ports. See also installation
drawings for more information.
Figure 4-15
host system via Modbus TCP.
Figure 4-15: Rosemount 2460 Connected to Host System Via Eth 1 Port
and Modbus TCP
B
C
A. Host system
B. Modbus TCP
C. Rosemount 2460 terminal board
Figure 4-16
Backup system hubs are connected to each other via Ethernet port ETH2.
Quick Start Guide
shows a wiring diagram with a Rosemount 2460 connected to a
A
shows two system hubs in a redundant system. The Primary and
Quick Start Guide
33
Advertisement
