Advertisement
Quick Links
The purpose of this guide is to:
1. Describe mounting of MP2 on post (pages 1 - 2)
2. Describe mounting of MP2 on rail (page 2).
3. Describe mounting of MP2 in channel (pages 3 - 4).
Parts Reference
The following parts and hardware are included with this installation kit (hardware not shown):
Item #
Description
1
Mounting Bracket/PRC Assembly
2
M4 x 14 mm Pan Head Machine Screw (PHMS)
3
M4 x 10 mm PHMS
4
Channel Mount
5
M4 x 10 mm Flat Head Machine Screw (FHMS)
6
Adjustable Stop
Tools Required: Phillips screwdriver (not provided).
Mounting Docking Station and Power Supply on a Post
1. Fasten docking station to Mounting Bracket with two (2) M4 x 14 mm PHMS as show below left.
2. Fasten power supply to bottom of Mounting Bracket with two (2) M4 x 10 mm PHMS as shown below right.
Installation Guide
Philips MP2 Post/Rail/Channel Mounting Kit
Docking Station
Mounting Bracket
M4 x 14 mm PHMS (2)
Qty
1
1
2
2
1
3
1
DU-PH-0062-01 Rev A 8/10/07 GCX Corp Page 1 of 4
4
M4 x 10 mm PHMS (2)
Advertisement
Related Manuals for GCX PH-0062-01
Summary of Contents for GCX PH-0062-01
- Page 1 2. Fasten power supply to bottom of Mounting Bracket with two (2) M4 x 10 mm PHMS as shown below right. Docking Station Mounting Bracket M4 x 14 mm PHMS (2) M4 x 10 mm PHMS (2) DU-PH-0062-01 Rev A 8/10/07 GCX Corp Page 1 of 4...
- Page 2 Unscrew PRC, rotate to position shown, and re-attach to Mounting Bracket. Installation Note: Docking Station Must Be Attached to Mounting Bracket before rotating PRC. See page 1, step 2 for attachment of power supply to Mounting Bracket. DU-PH-0062-01 Rev A 8/10/07 GCX Corp Page 2 of 4...
- Page 3 M4 x 14 mm PHMS (2) 3. Fasten power supply to Mounting Bracket with two (2) M4 x 10 mm PHMS as shown (right). Mounting Bracket M4 x 10 mm PHMS (2) DU-PH-0062-01 Rev A 8/10/07 GCX Corp Page 3 of 4...
- Page 4 Periodically check all mounting hardware. Tighten as necessary for optimal operation and safety. Cleaning the Mounting Assembly CAUTION: GCX makes no claims regarding the efficacy of the listed chemicals or processes as a means for controlling infection. Consult your hospital’s infection control officer or epidemiologist. To clean or sterilize mounted instruments or accessory equipment, refer to the specific instructions delivered with those products.