Program Date Time - Honeywell Lyric Programming Manual

Program System Type (Continued)
Programming Field
Events - Log Bypass
Events - Log Open
Close
Events - Log
Trouble
Non Security
Remote Access
Serial
Multi Mode Serial

Program Date Time

Programming Field
Date Time
Time Zone
Daylight Savings
Time
Start Month
Start Week
End Month
End Week
Function and Action
Enable or disable Zone Bypass Event Logging
The system toggles between "Disabled" and "Enabled".
Enable or disable Open/Close Event Logging
The system toggles between "Disabled" and "Enabled"
Enable or disable Trouble Event Logging
The system toggles between "Disabled" and "Enabled"
Enable or disable Non Security Event Logging (i.e.; Z-Wave, etc)
The system toggles between "Disabled" and "Enabled"
Enable or disable end user to access their system via a website
The system toggles between "Disabled" and "Enabled"
Enable or disable transmission of panel status events via email
(Active only when Remote Access Serial is enabled)
The system toggles between "Disabled" and "Enhanced Reports".
Function and Action
<"
1. Using the left " and right "
Year then select the date. Select the "
the next screen.
2. To set the correct time, touch the "Clear" button.
3. Enter the correct time and then select AM or PM. Select the "˅"
arrow to advance to the next screen or select "Save" to return
to the System Programming Screen.
Select the correct Time Zone.
Options:
Eastern (EST) Pacific (PST)
Central (CST) Alaska (AKST)
Hawaii (HAST) Brasilia (BRT)
Mountain (MST) Mid-Atlantic (MAT)
Enable or disable Daylight Savings Time adjustment. If "Yes" is
selected the Start Month, Start Week, End Month and End Week
options will be active.
The System toggles between "Yes" and "No".
Select a Daylight Savings Time Start Month.
Options:
January May
February June
March July
April August
Select a Daylight Savings Time Start Week
The System toggles between "First", "Second", "Third", "Last",
"Next to Last" and "3rd from Last".
Select a Daylight Savings Time End Month.
Options:
January May
February June
March July
April August
Select a Daylight Savings Time End Week
The System toggles between "First", "Second", "Third", "Last",
"Next to Last" and "3rd from Last".
Lyric Controller Programming Guide
>
"arrows select the Month and
˅"
arrow to advance to
Atlantic (AST)
Newfoundland (NT)
September
October
November
December
September
October
November
December
- 9 -
Programmed
Default
Enabled
Enabled
Enabled
Enabled
Disabled
Disabled
Programmed
Default
None
Eastern (EST)
Yes
March
Second
November
First