Program Reporter - Honeywell Lyric Programming Manual

Lyric Controller Programming Guide

Program Reporter

Programming Field
Report Selection
Arm Away
Arm Stay
Disarm
Exit Error
Recent Closing
Event Log Full
Trouble
Trouble Restore
Alarm Restore
Alarm Cancel
Test
Test Restore
Bypass
Bypass Restore
AC Loss
AC Loss Restore
Function and Action
Enable or disable Reporting of Specific Events. Use the down "
arrow to scroll to the next page of options. Use the "
return to the previous page.
Enable or disable reports to the Central Station when the system
is Armed Away.
The system toggles between "Disabled" and "Enabled".
Enable or disable reports to the Central Station when the system
is Armed Stay.
The system toggles between "Disabled" and "Enabled".
Enable or disable reports to the Central Station when the system
is Disarmed.
The system toggles between "Disabled" and "Enabled".
Enable or disable reports to the Central Station when an Exit Error
is detected.
This field is always "Enabled" and is not selectable.
Enable or disable reports to the Central Station when the system
is Armed Away and any burglary zone is faulted (within two
minutes after the initial exit delay expires).
This field is always "Enabled" and is not selectable.
Enable or disable reports to the Central Station when system
detects that the Event Log is full.
The system toggles between "Disabled" and "Enabled".
Enable or disable reports to the Central Station when the system
detects that a Zone has a Trouble condition.
The system toggles between "Disabled" and "Enabled".
Enable or disable reports to the Central Station when the system
detects that a zone that had been in Trouble has been restored.
The system toggles between "Disabled" and "Enabled".
Enable or disable reports to the Central Station when the system
detects that a zone that had been in Alarm has been restored.
The system toggles between "Disabled" and "Enabled".
Enable or disable reports to the Central Station when Alarm has
been cancelled
The system toggles between "Disabled" and "Enabled".
Enable or disable reports to the Central Station when a Test has
been initiated.
This field is always "Enabled" and is not selectable.
Enable or disable reports to the Central Station when a Test has
been completed.
This field is always "Enabled" and is not selectable.
Enable or disable reports to the Central Station when a Zone has
been manually bypassed.
The system toggles between "Disabled" and "Enabled".
Enable or disable reports to the Central Station when a bypassed
zone has been restored.
The system toggles between "Disabled" and "Enabled".
Enable or disable reports to the Central Station when the system
detects the loss of AC power. This report will be randomized up to
4 hours.
The system toggles between "Disabled" and "Enabled".
Enable or disable reports to the Central Station when the system
detects that AC power has been restored.
NOTE: This report will be randomized up to 4 hours.
The system toggles between "Disabled" and "Enabled".
- 18 -
Programmed
Default
˅
Not Applicable
"
˄
" arrow to
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled