Programming - Time Program; Programming - Temperatures - Honeywell homexpert Rondostat COMFORT+ HR30 Manual

Electronic radiator controller
Table of Contents

Advertisement

Selecting the "Day off" operating mode
1. Press the PROG button and turn the adjustment dial
to the left until
day off
2. Confirm the selected operating mode with the
button.
flashes.
Days
3. Use the adjustment dial to set the desired number of
days and confirm with
The selected operating mode is displayed.
i
• The procedure of creating the time program for a
day off is described in Section 8.
• When the number of days for holiday/day off is
entered, the current day counts as the first day.
• An overview of the program structure is shown on
the last page of these instructions.
7. Programming – temperatures
For the time program three preset temperatures which
can be assigned to the switching points in the time
program are possible:
• Comfort temperature 1
• Comfort temperature 2
• Conserve temperature
Setting the temperatures
1. Press the PROG button.
is displayed.
comfort 1
OK
2. Press the
button, use the adjustment dial to set
the Comfort temperature 1 and confirm with
is displayed briefly and then again
saved
.
comfort 1
3. Turn the adjustment dial clockwise until the next
temperature is displayed.
4. Repeat Steps 2 and 3 for the Comfort temperature 2
and the Conserve temperature.
5. Use the AUTO button to terminate programming.
i
The three preset temperatures (Comfort
temperature 1, 2 and Conserve temperature) can be
changed at any time.
i
• During programming the PROG button can be
used to return to the next level up.
• You can abort programming at any time by using
the AUTO button.
i
An overview of the program structure is shown on the
last page of these instructions.
is displayed.
OK
.
Factory setting 20 °C
Factory setting 22 °C
Factory setting 16 °C
OK
8. Programming – time program
Planning the time program
OK
You can specify up to 6 switching points per day.
The following has to be assigned to each switching
point:
• One of the three preset temperatures (Comfort
temperature 1, 2 and Conserve temperature).
• Beginning of the Heating/Conserve period
• End of the Heating/Conserve period
Example
Comfort 2
Comfort 1
Conserve
Switching points
The example shows the following time program:
time
1
6:00 – 9:00
2
9:00 – 12:00
3
12:00 – 14:00
.
4
14:00 – 17:00
5
17:00 – 22:00
6
22:00 – 6:00
i
An overview of the program structure is shown on the
last page of these instructions.
Week program
You can adjust the time program to your personal weekly
schedule. You have the following options to this purpose:
• Separate time programs for weekdays (Mo – Fr) and
weekend (Sa – Su)
• One time program for all days of the week (Mo – Su)
• A different time program for each day of the week
(Mo, Tu, We, Th, Fr, Sa, Su)
i
We recommend that you record your time program
before beginning programming.
- 6 -
Heating
Conserve
1
2
3
4
temperature
20 °C (Comfort temperature 1)
16 °C (Conserve temperature)
20 °C (Comfort temperature 1)
16 °C (Conserve temperature)
22 °C (Comfort temperature 2)
16 °C (Conserve temperature)
Heating
5
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents