Changing The Program - Honeywell ZG 215VN Operation And Putting Into Service

Changing the program

Factory settings:
n
Pull out the trip pin and insert it again at the desired
switch-on time. Push in the trip pins until they reach the
stop!
Owing to the different lengths, the trip pins must always be inser -
ted in a red/blue alternate ordere.
mode, while the blue pin activates reduced mode.
In order to make sure that the rooms are heated well in the morning,
the heating system's day mode should be activated between a half
an hour and an hour before using the rooms.
Energy saving tip: Reduced mode can be activated up
to an hour before the room is left. The storage capaci -
ty of the heating system and building is enough to
keep the rooms warm for some time.
Timer with day program
The day program is repeated every 24
hours. If a (second) decrease in tempera -
ture is desired in the course of the day to
save energy, the program needs to be ex -
tended. Take the extra trip pins
insert them at the desired time.
red pin 6:00, blue pin 22:00.
Thered trip pin switches on day
4
and