Specifications - Briggs & Stratton 1696715-00 Operator's Manual

Specifications

The spark ignition system on this snowthrower complies with Canadian standard ICES-002.
Engine Model
Series 100000
Oil Capacity 20 oz ( ,59 L)
Fuel Tank Capacity 3.0 qts (2,8 L)
Spark Plug Gap .030 in (,76 mm)
Spark Plug Torque 180 lb-in (20 Nm)
Armature Air Gap .010 - .014 in (,25
- ,36 mm)
Intake Valve .004 - .006 in (,10
Clearance - ,15 mm)
Exhaust Valve .006 - .008 in (,15
Clearance
- ,20 mm)
* Engine power will decrease 3.5% for each 1,000 feet (300 meters) above see level and 1% for each 10° F (5.6° C) above 77° F (25° C). The engine will
operate satisfactorily at an angle up to 15°.
Power Ratings
The gross power rating for individual gasoline engine models is labeled in accordance with SAE (Society of Automotive
Engineers) code J1940 Small Engine Power & Torque Rating Procedure, and is rated in accordance with SAE J1995. Torque
values are derived at 2600 RPM for those engines with "rpm" called out on the label and 3060 RPM for all others; horsepower
values are derived at 3600 RPM. The gross power curves can be viewed at www.BRIGGSandSTRATTON.COM. Net power
values are taken with exhaust and air cleaner installed whereas gross power values are collected without these attachments.
Actual gross engine power will be higher than net engine power and is affected by, among other things, ambient operating
conditions and engine-to-engine variability. Given the wide array of products on which engines are placed, the gasoline engine
may not develop the rated gross power when used in a given piece of power equipment. This difference is due to a variety
of factors including, but not limited to, the variety of engine components (air cleaner, exhaust, charging, cooling, carburetor,
fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine
variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for
this engine.
Snow Snow
Series 120000
20 oz (,59 L)
3.2 qts (3,0 L)
.030 in (,76 mm)
180 lb-in (20 Nm)
.010 - .014 in (,25
- ,36 mm)
.004 - .006 in (,10
- ,15 mm)
.009 - .011 in (,23
- ,28 mm)
Snow
Series 130000 Series 150000
20 oz (,59 L) 20 oz (,59 L)
3.2 qts (3,0 L) 3.2 qts (3,0 L)
.030 in (,76 mm) .030 in (,76 mm)
180 lb-in (20 Nm) 180 lb-in (20 Nm)
.010 - .014 in (,25 .010 - .014 in (,25
- ,36 mm) - ,36 mm)
.004 - .006 in (,10 .004 - .006 in (,10
- ,15 mm) - ,15 mm)
.006 - .008 in (,15 .009 - .011 in (,23
- ,20 mm) - ,28 mm)
Snow Snow
Series 8C100
20 oz (,59 L)
2.1 qts (2,0 L)
.030 in (,76 mm)
180 lb-in (20 Nm)
.006 - .010 in
(,15-,25 mm)
.006 - .010 in
(,13-,18 mm)
.005 - .007 in
(,13-,18 mm)
15