Specifications - Briggs & Stratton Commercial Series Operator's Manual

Specifications

Specifications Chart
The spark ignition system on this rider complies with Canadian standard ICE-002.
Item
ENGINE
Model
Displacement
Oil Capacity
Spark Plug Gap
Spark Plug Torque
TRANSMISSIONS
Type
Drive
Model
Hydraulic Fluid
MOWER DECKS
Width of cut
Number of Blades
Platform
Cutting Height
CHASSIS
Fuel Tank Capacity
Front Wheels Tire Size
Tire Inflation Pressure, Front
Rear Wheels Tire Size
Tire Inflation Pressure, Rear
Power Ratings
The gross power rating for individual gasoline engine models is labeled in accordance with SAE (Society of Automotive Engineers)
code J1940 Small Engine Power & Torque Rating Procedure, and is rated in accordance with SAE J1995. Torque values are
derived at 2600 RPM for those engines with "rpm" called out on the label and 3060 RPM for all others; horsepower values are
derived at 3600 RPM. The gross power curves can be viewed at www.BRIGGSandSTRATTON.COM. Net power values are
taken with exhaust and air cleaner installed whereas gross power values are collected without these attachments. Actual gross
engine power will be higher than net engine power and is affected by, among other things, ambient operating conditions and
engine-to-engine variability. Given the wide array of products on which engines are placed, the gasoline engine may not develop
the rated gross power when used in a given piece of power equipment. This difference is due to a variety of factors including,
but not limited to, the variety of engine components (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application
limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing
and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this engine.
Parts and Accessories
Contact an authorized dealer.
Commercial Series by Briggs & Stratton with EFM
44.18 cu in (724 cc)
64 oz (1,9 L)
.030 in (,76 mm)
180 in-lbs (20 Nm)
Hydrostatic Tuff Torq®
2 Wheel Drive
K57, K62 (HS), K66 (HS)
10W-30 Synthetic
44 in (111,8 cm), 48 in (121,9 cm), 50 in (127 cm),
52 in (132 cm)
3
Side Discharge
1 - 4 in (2,5 - 10,2 cm)
3.6 gal (13,6 L)
15 x 6.0-6
12 - 14 psi (,82 - ,96 bar)
16 x 6.5-8
10 psi (,68 bar)
Commercial Series by Briggs & Stratton
44.18 cu in (724 cc)
64 oz (1,9 L)
.030 in (,76 mm)
180 in-lbs (20 Nm)
Hydrostatic Tuff Torq®
2 Wheel Drive
K57, K62 (HS), K66 (HS)
10W-30 Synthetic
44 in (111,8 cm), 48 in (121,9 cm), 50 in (127 cm),
52 in (132 cm)
3
Side Discharge
1 - 4 in (2,5 - 10,2 cm)
3.6 gal (13,6 L)
15 x 6.0-6
12 - 14 psi (,82 - ,96 bar)
16 x 6.5-8
10 psi (,68 bar)
21