Network Menu - Others Menu - Epson EB-U50 User Manual

Projector Network Settings - Network Menu
Setting Options
Community Name Up to 32
alphanumeric
characters
(do not use spaces
and any symbols
other than @)
PJLink Notification On
Off
Notified IP Address IP address

Network Menu - Others Menu

Settings on the Others menu let you select other network settings.
Network > Network Configuration > Others
s
Description
Set the SNMP community name.
Enables or disables the PJLink
notification function.
Enter the IP address to receive the
projector's operating status when the
PJLink notification function is enabled.
Enter the addresses using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Setting Options
Secure HTTP On
Off
Web Server Cert. —
Priority Gateway Wired LAN
Wireless LAN
AMX Device On
Discovery
Off
Crestron On
Connected
Off
Art-Net Art-Net
Net
Sub-Net
Universe
Start Channel
Message On
Broadcasting
Off
g g Related Links
• "Crestron Connected Support" p.115
142
Description
To strengthen security, communication
between the projector and computer in
Web control is encrypted. When setting
security with Web control, it is
recommended to set this to On.
Imports the Web server certificate for
secure HTTP.
You can set the priority gateway.
Set to On when you want to allow the
projector to be detected by AMX Device
Discovery.
Set to On only when monitoring or
controlling the projector over the
network using Crestron Connected.
Enabling Crestron Connected disables
the Epson Message Broadcasting feature
in the Epson Projector Management
software.
Set this to On to control the projector
using Art-Net.
Sets the projector's Net, Sub-Net, and
Universe.
Sets the start channel that handles Art-
Net.
Set to On to receive the message
delivered by Epson Projector
Management. See the Epson Projector
Management Operation Guide for details.
Available only when Crestron
Connected is set to Off.