Network Menu - Others Menu - Epson EB-1470Ui User Manual

Projector Network Settings - Network Menu
Setting Options
SNMP On
Off
Trap IP Address 1 IP address
Trap IP Address 2
Community Name Up to 32
alphanumeric
characters
(do not use spaces
and any symbols
other than @)
PJLink Notification On
Off
Notified IP Address IP address

Network Menu - Others Menu

Settings on the Others menu let you select other network settings.
Description
Set to On to monitor the projector using
SNMP. To monitor the projector, you
need to install the SNMP manager
program on your computer. SNMP
should be managed by a network
administrator.
The default value is Off.
Enter up to two IP addresses to receive
SNMP notifications, using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Set the SNMP community name.
Enables or disables the PJLink
notification function.
Enter the IP address to receive the
projector's operating status when the
PJLink notification function is enabled.
Enter the addresses using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Network > Network Configuration > Others
s
Setting Options
Secure HTTP On
Off
Web Server Cert. —
Priority Gateway Wired LAN
Wireless LAN
AMX Device On
Discovery
Off
Crestron On
RoomView
Off
238
Description
To strengthen security, communication
between the projector and computer in
Web control is encrypted. When setting
security with Web control, it is
recommended to set this to On.
Imports the Web server certificate for
secure HTTP.
You can set the priority gateway.
Set to On when you want to allow the
projector to be detected by AMX Device
Discovery.
Set to On only when monitoring or
controlling the projector over the
network using Crestron RoomView.
Enabling Crestron RoomView disables
the Epson Message Broadcasting feature
in the Epson Projector Management
software.