Projector Setup Settings - Extended Menu - Epson EB-U50 User Manual

Projector Setup Settings - Extended Menu

Setting Options
Auto Power On
Startup Source
HDMI EQ Setting
Advanced
Date & Time
Description
Auto Power On: select the image source
from which you want to automatically
start projection. When the projector
detects the input signal from the selected
image source, it projects automatically in
standby mode.
The following image sources are available
for this feature:
• HDMI1
• Computer1
• USB Display
Select the image source you want to
project when the projector is turned on
in Content Playback mode.
HDMI EQ Setting: Adjust the HDMI
input signal level depending on the
devices connected to the HDMI port. If
there is a lot of interference in the image,
or if a problem such as no image being
projected occurs, change the setting.
If no images are displayed using a
thumb-sized media streaming device,
select 1.
Batch Setup Range: select All to copy all
of the projector menu settings using the
batch setup feature. Select Limited, if you
do not want to copy the following
settings:
• Password Protection settings
• Network menu settings
Date & Time: adjusts the projector's
system time and date settings.
• Daylight Saving Time: set to On to
activate daylight saving time.
• Internet Time: set to On to update the
time automatically through an Internet
time server.
Setting Options
A/V Settings
A/V Output
Audio Settings
Multi-Projection
Projector ID
Color Mode
Color Uniformity
Edge Blending
Scale
Power
Consumption
Color Matching
Reset
Schedule Settings To Schedule
Settings menu
134
Description
Selects various audio and video output
settings:
A/V Output: set to Always On to output
audio and images to external devices
when the projector is in standby mode.
Audio Output: selects the audio input
port when projecting images from
anything except for HDMI ports.
HDMI1 Audio Output/HDMI2 Audio
Output: selects the audio input port
when projecting images from HDMI
ports.
Make settings when projecting from
multiple projectors:
Assigns an ID for the projector when you
use multiple projectors.
When projecting from multiple
projectors, make sure you select Multi-
Projection for all of the projectors.
Adjusts the color tone balance for the
whole screen.
Corrects a border between multiple
images to create a seamless screen.
Adjusts the scale of the image displayed
by each projector.
Selects the brightness mode of the
projector lamp.
Corrects the difference between the tint
and brightness of each projected image.
Resets all adjustment values for the
Multi-Projection menu to their default
settings.
Schedules projector events to occur
automatically at selected dates and times.