Solutions When An Afterimage Remains On The Projected Image; Solutions To Sound Problems - Epson EB-U50 User Manual

Solving Image or Sound Problems
• Adjust the available settings in the projector's Image menu for the current
input source, such as Brightness, Contrast, Tint, and Color Saturation.
• Make sure you selected the correct Input Signal or Video Range setting in
the projector's Signal menu, if available for your image source.
Signal > Advanced > Input Signal
s
Signal > Advanced > Video Range
s
• Make sure all the cables are securely connected to the projector and your
video device. If you connected long cables, try connecting shorter cables.
• If you are using ECO as Power Consumption, try selecting Normal.
ECO > Power Consumption
s
At high altitudes or locations subject to high temperatures, the image
a
may become darker and you may not be able to adjust the Power
Consumption setting.
• Position the projector close enough to the screen.
• If the image has been progressively darkening, you may need to replace the
projector lamp soon.
g g Related Links
• "Adjusting Image Quality (Color Mode)"
• "Input Signal Settings - Signal Menu"
• "Image Quality Settings - Image Menu"
• "Projector Setup Settings - ECO Menu"
Solutions When an Afterimage Remains on the
Projected Image
If you see an afterimage in the projected image, use the Refresh Mode feature
to clear it. Select Refresh Mode > Start in the projector's Reset menu.
g g Related Links
• "Projector Reset Options - Reset Menu"
p.51
p.130
p.128
p.144
p.148

Solutions to Sound Problems

If there is no sound or the volume is too low or high, try the following
solutions:
• Adjust the projector's volume settings.
• Press the [A/V Mute] button on the remote control to resume video and
audio if they were temporarily stopped.
• Check your computer or video source to make sure the volume is turned up
and the audio output is set for the correct source.
• Check the audio cable connections between the projector and your video
source.
• If you do not hear sound from an HDMI source, set the connected device to
PCM output.
• Make sure any connected audio cables are labeled "No Resistance".
• If you are using the USB Display function, turn on the Output audio from
the projector setting in the Epson USB Display Settings program on your
computer.
• Select the correct audio input in the A/V Settings setting in the projector's
Extended menu.
• When you are connecting the projector to a Mac using an HDMI cable,
make sure your Mac supports audio through the HDMI port. If not, you
need to connect an audio cable.
• If you want to use a connected audio source when the projector is off, set
the Standby Mode option to Communication On and make sure the A/V
Settings options are set correctly in the projector's Extended menu.
ECO > Standby Mode > Standby Mode
s
• If the volume for the computer is set to the minimum while the projector is
set to the maximum, the noise may be mixed. Turn up the computer's
volume and turn down the projector's volume. (When you use Epson
iProjection (Windows/Mac) or USB Display.)
g g Related Links
• "Projector Connections" p.20
• "Projector Setup Settings - Extended Menu"
• "Projector Setup Settings - ECO Menu"
174
p.133
p.144