Network Menu - Others Menu - Epson CO-FD01 User Manual

Projector Network Settings - Network Menu
Setting Options
From Up to 32
alphanumeric
Address 1 Setting
characters
Address 2 Setting
Up to 64
Address 3 Setting
alphanumeric
characters from the
Web browser
(do not use " ( ) , : ;
< > [ \ ] spaces)
SNMP On
Off
Trap IP Address 1 IP address
Trap IP Address 2
Community Name Up to 32
alphanumeric
characters
(do not use spaces
and any symbols
other than @)

Network Menu - Others Menu

Settings on the Others menu let you select other network settings.
Description
Enter the email address of the sender.
Enter the e-mail address, and select the
alerts you want to receive. Repeat for up
to three addresses.
Set to On to monitor the projector using
SNMP. To monitor the projector, you
need to install the SNMP manager
program on your computer. SNMP
should be managed by a network
administrator.
Enter up to two IP addresses to receive
SNMP notifications, using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Set the SNMP community name.
Network > Network Configuration > Others
s
Setting Options
Command Protected
Communication
Compatible
Message On
Broadcasting
Off
Description
Selects the authentication method for
command communication.
Set to Protected when performing a
digest authentication using Web Control
Password. You need to install the latest
version of the Epson Projector
Management software.
Set to Compatible when performing
plain text authentication using the
Monitor Password (up to 16
alphanumeric characters long).
Select Compatible when monitoring
projectors with a switcher and a system
controller or using Epson Projector
Management ver.5.30 or earlier.
Set to On to receive the message
delivered by Epson Projector
Management. See the Epson Projector
Management Operation Guide for details.
88