Disconnecting A Usb Device; Connecting To A Document Camera; Connecting To External Output Devices; Connecting To A Vga Monitor - Epson EB-U50 User Manual

Projector Connections
b
Connect the USB cable or USB flash drive to the projector's USB-A port
as shown.
Attention
• Use the USB cable supplied with or specified for use with the device.
• Do not connect a USB hub or a USB cable longer than 3 meters, or the
device may not operate correctly.
c
Connect the other end to your device, if necessary.

Disconnecting a USB Device

When you have finished presenting with a connected USB device, disconnect
the device from the projector.
a
Turn off and unplug the device, if necessary.
b
Disconnect the USB device from the projector.

Connecting to a Document Camera

You can connect a document camera to your projector to project images
viewed by the camera.
The connection method varies depending on your Epson document camera
model. See the document camera manual for details.

Connecting to External Output Devices

Follow the instructions in these sections to connect external devices to the
projector.
g g Related Links
• "Connecting to a VGA Monitor"
• "Connecting to External Speakers"

Connecting to a VGA Monitor

If you connected the projector to a computer using a Computer port, you can
also connect an external monitor to the projector. This lets you see your
presentation on the external monitor even when the projected image is not
visible.
• If you want to output images to an external monitor when the
a
projector is turned off, select Always On as the A/V Output setting
in the projector's Extended menu.
s Extended > A/V Settings > A/V Output
• Monitors that use a refresh rate of less than 60 Hz may not be able to
display images correctly.
a
Make sure your computer is connected to the projector's Computer
port.
• If there are two computer ports, make sure you use the
a
Computer1 port.
• Only analog RGB signals from the Computer1 port can be
output to an external monitor. You cannot output signals
input from other ports or component video signals.
p.25
p.26
25