Adjusting The Image Height - Epson EB-U50 User Manual

Adjusting the Image Height

If you are projecting from a table or other flat surface and the image is too
high or low, you can adjust the image height using the projector's adjustable
feet.
The larger the angle of tilt, the harder it becomes to focus. Locate the
projector so that it only needs to be tilted at a small angle.
a
Turn on the projector and display an image.
b
Press the foot release lever to extend and retract the front adjustable
foot.
The foot extends from the projector.
You can adjust the position up to approximately 10 degrees.
c
Release the lever to lock the foot.
Caution
Be careful not to get your fingers caught between the projector and table or
floor.
d
If the image is tilted, rotate the rear feet to adjust their height.
Extend the rear foot
Retract the rear foot
B
If the projected image is unevenly rectangular, you need to adjust the image
shape.
g g Related Links
• "Image Shape" p.42
41