Projector Setup Settings - Eco Menu - Epson EB-U50 User Manual

Projector Setup Settings - ECO Menu

Settings on the ECO menu let you customize projector functions to save
power.
When you select a power-saving setting, a leaf icon appears next to the menu
item.
Setting Options
Power
Consumption
Normal
ECO
Description
Selects the brightness mode of the
projector lamp. You cannot select
settings when you use your projector at
high altitude or in locations subject to
high temperatures.
Normal: sets maximum lamp brightness.
ECO: reduces lamp brightness and fan
noise, and saves power and lamp life.
Setting Options
Light Optimizer On
Off
Sleep Mode On
Off
Sleep Mode Timer 1 to 30 minutes
A/V Mute Timer On
Off
Standby Mode
Standby Mode
Port
144
Description
When set to On, the lamp brightness is
adjusted according to the projected
image. This helps to reduce the power
consumption by lowering the lamp
brightness according to the scene being
projected.
The setting is stored for each Color
Mode.
This item is enabled when:
• Power Consumption is set to Normal.
Automatically turns off the projector
after an interval of inactivity (when On).
Sets the interval for Sleep Mode.
Automatically turns off the projector
after 30 minutes if A/V Mute is enabled
(when On).
Available when you have set A/V Output
to While Projecting.
Communication On indicates that the
projector can be monitored over a
network when the projector is in standby
mode. Enable this setting to allow the
following operations to occur when the
projector is in standby mode:
• Monitor and control the projector over
a network
Communication On is automatically
selected when A/V Output is set to
Always On.
s Extended > A/V Settings > A/V
Output
Selects the port to use from Wired LAN
or Wireless LAN while the Standby
Mode setting is set to Communication
On.