Input Signal Settings - Signal Menu - Epson EB-U50 User Manual

Input Signal Settings - Signal Menu

Normally the projector automatically detects and optimizes the input signal
settings. If you need to customize the settings, you can use the Signal menu.
The available settings depend on the currently selected input source.
You can restore the default settings of the Tracking, Sync., and
a
Position settings by pressing the [Auto] button on the remote control.
To change settings for an input source, make sure the source is connected and
select that source.
Setting Options
Resolution Auto
Wide
Normal
Aspect See the list of
available aspect
ratios.
Tracking Varying levels
available
Sync. Varying levels
available
Description
Sets the input signal resolution if not
detected automatically using the Auto
option.
Sets the aspect ratio (width-to-height
ratio) for the selected input source.
Adjusts the signal to eliminate vertical
stripes in computer images.
Adjusts the signal to eliminate fuzziness
or flickering in computer images.
Setting Options
Position —
Auto Setup On
Off
Overscan Auto
Off
4%
8%
Advanced Video Range
Input Signal
Scale Various scale
options
Reset —
g g Related Links
• "Available Image Aspect Ratios" p.49
130
Description
Adjusts the image location on the screen.
Automatically optimizes computer image
quality (when On).
Changes the projected image ratio to
make the edges visible by a selectable
percentage or automatically.
Video Range: sets the video range to
match the setting of the device connected
to the HDMI port.
Input Signal: specifies the signal type
from the input sources connected to the
computer ports.
• Auto: detects signals automatically.
• RGB: inputs computer/RGB video
signals.
• Component: inputs component video
signals.
When using multiple projectors to
project one image, adjusts the scale of the
image displayed by each projector.
Resets all adjustment values on the
Signal menu to their default settings,
except for the following:
• Input Signal