Image Shape; Auto V-Keystone; Correcting The Image Shape With The Keystone Button - Epson EB-U50 User Manual

Image Shape

You can project an even, rectangular image by placing the projector directly
in front of the center of the screen and keeping it level. If you place the
projector at an angle to the screen, or tilt it up or down, or off to the side, you
may need to correct the image shape.
g g Related Links
• "Auto V-Keystone" p.42
• "Correcting the Image Shape with the Keystone Button"
• "Correcting the Image Shape with Quick Corner"

Auto V-Keystone

When the projector is moved or tilted, Auto V-Keystone automatically
corrects any vertical keystone distortion.
Auto V-Keystone can correct the projected image distortion in these
conditions:
• Projection angle is about 30º up or down
• The Projection setting is set to Front in the projector's Extended menu
• If you do not want to use the Auto V-Keystone function, set Auto
a
V-Keystone to Off in the projector's menu.
s Settings > Keystone > H/V-Keystone > Auto V-Keystone
g g Related Links
• "Projection Modes" p.38
• "Projector Setup Settings - Extended Menu"
• "Projector Feature Settings - Settings Menu"
p.42
p.43
p.133
p.131
Correcting the Image Shape with the Keystone
Button
You can use the [Keystone] button on the remote control to correct the shape
of an image that is unevenly rectangular.
• You cannot combine H/V-Keystone correction with other image
a
shape correction methods.
• You can correct horizontal keystone distortion up to 30º right or left.
a
Turn on the projector and display an image.
b
Press the [Keystone] button on the remote control, select H/V-
Keystone, and then press [Enter].
42