Maintenance Log - Mercury Sterndrive QSD 2.0 Manual

Diesel engine
Table of Contents

Advertisement

Task Interval
Every 100 hours or
annually
(whichever occurs first)
Every 2 Years
Every 300 hours or 3
years
Every 500 hours or 5
years
Every 700 hours or 3
years
Every 1000 hours or 4
years
Every 1000 hours or 5
years

Maintenance Log

Record all maintenance performed on your power package here. Be sure to save all work orders and receipts.
90-8M0069751
APRIL 2012
eng
Change the engine oil and filter.
Change the sterndrive gear lube.
Torque the gimbal ring U‑bolt locknuts.
Replace the fuel filters.
Check the steering system and the remote control for loose, missing, or damaged parts.
Lubricate the cables and linkages.
Inspect and lubricate the sterndrive U‑joint splines. Inspect the bellows, the exhaust tube, and
check the clamps.
Lubricate the gimbal bearing and engine coupler (Lubricate the engine coupler every 50
hours if operated at idle for prolonged periods of time).
Check the continuity circuit for loose or damaged connections. If equipped with
MerCathode®, test the unit output.
Check the engine alignment.
Torque the engine mounts.
Check the electrical system for loose, damaged, or corroded terminals.
On driveshaft extension models, lubricate the drive shaft U‑joints, transom end (tailstock)
bearings, and engine end (output) bearings.
Inspect the condition and tension of the engine accessory drive belts.
Inspect the cooling system and the exhaust system for damage or leaks. Check both systems
hose clamps for tightness.
Disassemble and inspect the engine seawater pump and replace worn components.
Clean the seawater section of the closed cooling system. Clean, inspect, and test the
pressure cap. Check the anodes and replace if 50% eroded.
Replace the air filter.
Replace the engine coolant.
Disassemble and inspect the Alpha drive seawater pump. Replace any worn components.
Clean the aftercooler core.
Replace the power assisted steering pump drive belt.
Replace the engine timing belt.
Clean the fuel tank.
Maintenance to Be Performed
Section 5 - Maintenance
Page 45

Advertisement

Table of Contents
loading

Table of Contents