Table of Contents
Advertisement
Installation Procedure
Install the TRX Module and Cable Connections
Tilt the main frame up by extending the front feet down. This will make it
NOTE
easier to install the TRX module.
8. Refer to
Figure
8. Connect the 100 MHz Reference cable of the new TRX to an open 100 MHz
out port on the M9300A Reference module.
If you have a 3 up system it may require the removal of TRX 3 to gain access
NOTE
for the connection of the 100 MHz Reference cable. See
12
Figure
9.
Installation Note E6650-90013
Advertisement
Table of Contents
