Operation By Controller Command - Mitsubishi Electric MELSERVO-JET MR-JET-G-N1 Series User Manual

Operation by controller command

Confirm that the servo motor operates correctly under the commands from the controller. Give a low speed command at first
to check the servo motor operations such as the rotation direction. If the servo motor does not operate in the intended
direction, check the input signal.
1.
Display the Display All window in MR Configurator2. Confirm that there is no error in the items such as servo motor
speed and load ratio.
2.
Display the I/O Monitor window. Confirm that there is no error in the I/O signal.
4 STARTUP
34
4.1 Turning on servo amplifier for the first time