Mitsubishi Electric MELSERVO-JET MR-JET-G-N1 Series User Manual page 87

8
NETWORK PARAMETERS
Refer to the following manual for the parameters not described in this chapter.
MR-JET-G User's Manual (Parameters)
8.1
Network basic parameters
[Pr. NPA01_For manufacturer setting]
This servo parameter is for manufacturer setting.
[Pr. NPA02_For manufacturer setting]
This servo parameter is for manufacturer setting.
[Pr. NPA04_For manufacturer setting]
This servo parameter is for manufacturer setting.
[Pr. NPA08_For manufacturer setting]
This servo parameter is for manufacturer setting.
[Pr. NPA09_Node address setting]
Initial value
00000000h
Set the node address of the network.
When using this network parameter, set the ID setting switch to "00h".
Setting range
00000000h to 0000FFFFh
Size
4 bytes
8.1 Network basic parameters
Ver.
A4
8 NETWORK PARAMETERS
8
85