S-Video/Video Connections - JVC HM-DB1U Instructions Manual

44
EN
S-VIDEO/
VIDEO
Connections
Various connections for editing tapes
The following three methods can be used for editing tapes.
● VHS to S-VHS editing (VIDEO-VIDEO connection):
Although the picture quality is inherently limited by the
original VHS quality, the edited tape has better picture
quality than those made by VHS-to-VHS editing.
● S-VHS to VHS editing (VIDEO-VIDEO connection): Since
the original source is recorded in S-VHS mode, the edited
tape has better picture quality than those made by VHS-
to-VHS editing.
● S-VHS to S-VHS editing (S-VIDEO connection): Original
picture quality of S-VHS made can be duplicated with
minimal picture degradation. This is the best editing
method you can use on S-VHS VCRs.
You can use a camcorder as the playback device and
A
your VCR as the recording VCR.
This VCR (for recording)
IN F-1
To [AUDIO IN]
To Audio Output
Audio cable
Connectors
(not supplied)
To [S-VIDEO IN]
S-video cable
To S-Video
(not supplied)
Output
Connector
You can use your VCR as the playback or recording
B
VCR.
Ex. When using this VCR as the recording VCR
To Audio
Output
Connectors
1
+
Camcorder
(for playback)
EDITING (cont.)
This VCR (for recording)
OUT
S VIDEO
R AUDIO L VIDEO R
To [AUDIO
IN]
Audio cable
(not supplied)
To S Video
Connector
Another VCR (for playback)
Make connections
A
Connection with the camcorder
Connect an audio/S-video cable between the
camcorder's audio/S-video output connectors
and your VCR's [AUDIO/S VIDEO IN]
connectors.
● When using a camcorder with a monaural
output, connect the audio output connector on
the camcorder to the [AUDIO-L IN] connector
on this VCR.
NOTE:
If the camcorder does not have S-video output
connector, use a video cable.
VHF/UHF
ANTENNA
IN
IN
S VIDEO
IN(L-1)
i.LINK IN/OUT
ANTENNA
S200
OUT
AUDIO L VIDEO
D THEATER
REGION 1
IN(L-2)
To [S VIDEO
IN]
S-video
cable
(not
supplied)
Output