Tuner Setting; Setting Channels Automatically; Auto Channel Set - JVC HM-DB1U Instructions Manual

Tuner Setting

● Turn on the VCR and the TV, and select the AV
mode on the TV.
● Set the [VCR/TV/CABLE/DBS] selector on the
Remote to [VCR].
VCR CABLE
TV
/DBS
1 2
4 5
7 8
0
1 4
3
6
9
2 3

Setting channels automatically

— Auto Channel Set

Use Auto Channel Set only if channels have not been set
correctly by the Plug & Play setting. If you want to add or
delete channels, use Manual Channel Set (
1
Access Main Menu screen
Press [MENU].
2
Access Tuner Set screen
Press [%fi] to move the
highlight bar (arrow) to
"TUNER SET", then press
[OK] or [#].
3
Perform Auto Channel Set
You can automatically
set the receivable
channels in your area in
the order of their
frequencies.
Press [%fi] to move the
highlight bar (arrow) to
"AUTO CHANNEL SET",
then press [OK] or [#].
NOTES:
● When Auto Channel Set is
complete, "SCAN
COMPLETED" appears on
screen.
● If the scan was
unsuccessful, "SCAN COMPLETED–NO SIGNAL–"
appears on screen. Check the connections, then press
[OK] to retry, or press [MENU] to end.
4
Return to normal screen
Press [MENU].
INFORMATION
The VCR selects the correct band (TV or CATV)
automatically during Auto Channel Set.
The selected band will be displayed on the right side of
"BAND" on the Tuner Set screen.
13
EN
pg. 14).
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
i.LINK SET
PRESS( , ), THEN (OK)
PRESS(MENU) TO END
TUNER SET
BAND CATV
AUTO CHANNEL SET
MANUAL CHANNEL SET
SELECT WITH( , ) AND(OK)
PRESS(MENU) TO END
AUTO CHANNEL SET
SCANNING...
PRESS(MENU) TO END