Table of Contents
Advertisement
42
EN
i.LINK
Connections
NOTES:
● You cannot use the i.LINK connection depending on the type
of devices connected. In this case, set "LINC" to "OFF"
(
pg. 40)
● If i.LINK is connected to a camcorder equipped with DV
connector, editing cannot be performed as there is no
recognition between this VCR and the connected device.
[I- ] will be displayed on the front panel display.
You can use a camcorder as the playback device and
A
your VCR as the recording VCR.
This VCR (for recording)
R
AUDIO
Digital Camcorder
(for playback)
To i.LINK Input/
Output Connector
NOTE:
Only MPEG2 format images can be edited. Editing of DV
format images is not possible.
VHF/UHF
ANTENNA
IN
OUT
IN
S VIDEO
S VIDEO
IN(L-1)
i.LINK IN/OUT
ANTENNA
S200
OUT
L
VIDEO
R
AUDIO
L
VIDEO
D THEATER
REGION 1
IN(L-2)
To [i.LINK IN/OUT]
Connector
i.LINK cable
(supplied)
This VCR supports the copy protection technologies
of DTLA (Digital Transmission Licensing
Administrator). These technologies are admitted by
DTLA.
It is impossible to dub copy-limited signals between
the devices which supports copy protection
technologies of DTLA. It is impossible to dub to
other tapes the program which only one recording
is permitted.
When connecting to other devices, only the
operation of the devices which supports DTLA is
guaranteed. The operation of non-DTLA-supported
devices is not guaranteed.
You can use your VCR as the playback or recording
B
VCR.
Ex. When using this VCR as the recording VCR
This VCR (for recording)
OUT
R
AUDIO
L
VIDEO
To [i.LINK IN/OUT]
To i.LINK Input/Output
Another VCR (for playback)
EDITING
VHF/UHF
ANTENNA
IN
IN
S VIDEO
IN(L-1)
S VIDEO
i.LINK IN/OUT
ANTENNA
S200
OUT
R
AUDIO
L
VIDEO
D THEATER
REGION 1
IN(L-2)
Connector
i.LINK cable
(supplied)
Connector
Advertisement
Table of Contents
