Timer Recording; Express Timer Programming - JVC HM-DB1U Instructions Manual

28
EN
Express Timer
Programming
● Turn on the VCR and the TV, and select the AV
mode on the TV.
● Set the [VCR/TV/CABLE/DBS] selector on the
Remote to [VCR].
1
[POWER]
IN F-1 IN F-1
[TIMER ( )]
VCR
CABLE
TV /DBS
2 8
3 - 6
1 2
4 5
[DBS]
7 8
[DAILY]
0
NOTES:
● If you are using a DBS receiver, refer to 'Satellite Auto
Recording' on page 31.
● To perform timer programming via i.LINK, refer to 'i.LINK
Timer Programming' on page 32.
+ +
[POWER]
9
[TIMER ( )]
3
7
6
9 [WEEKLY]
Timer recording allows you to program the VCR to
automatically record a broadcast at some future time.
You can directly program the VCR's timer to record up to
8 broadcasts, as far as a year in advance. Remember, the
clock must be set before you can program the timer
( pg. 10).
1
Load a cassette
Make sure the record safety tab is intact. If not,
cover the hole with adhesive tape, then load it
into the VCR.
● The VCR turns on, and the counter is reset,
automatically.
2
Access Program screen
Press [PROGRAM].
● The clock must be set
to access the Program
screen. If you have not
set the clock, the Main
Menu screen appears
after an error message
is displayed. Refer to
page 10 for the clock setting procedure.
3
Set program start time
Press [START +/–] repeatedly to enter the
time you want recording
to start.
● Press and hold [START
+/–] to increase the
time in 30-minute
intervals.
4
Set program stop time
Press [STOP +/–] repeatedly to enter the time you
want recording to stop.
● Press and hold [STOP +/–] to increase the time
in 30-minute intervals.
5
Set program date
Press [DATE +/–]. (The current date is displayed
on the screen. The date you enter appears in its
place.)
6
Set channel number
Press [TV/VCR CH +/–].
● Holding down [TV/VCR CH +/–] rapidly
changes the channel numbers.
● To select i.LINK input, press the 'Number' key
[7(DBS)]. The channel switches to "i.LINK"
when this key is pressed.

TIMER RECORDING

PROGRAM 1
START STOP
--:--AM --:--AM
DATE CH
--/--/-- --- SP
PRESS(+/-,SP/EP,8=DAILY
9=WEEKLY),THEN(OK)
PRESS(PROG.) TO END
PROGRAM 1
START STOP
8:00PM --:--AM
DATE CH
--/--/-- --- SP
PRESS(+/-,SP/EP,8=DAILY
9=WEEKLY),THEN(OK)
PRESS(PROG.) TO END