Table of Contents
Advertisement
24
EN
S-VHS/VHS Recording
1
Load a cassette
Make sure the record safety tab is intact. If not,
cover the hole with adhesive tape before inserting
the cassette.
2
Select recording channel
On the front panel:
Press [CHANNEL +] or [–].
On the Remote:
a– Press [TV/VCR CH +] or [–].
or
b– Press the 'Number' keys.
3
Set recording speed
Press [REC SPEED] to set the recording speed.
4
Start recording
On the front panel:
Press [REC ( ¶ )].
On the Remote:
While holding [REC ( ¶ )], press [PLAY ( 3 )].
● If "VIDEO CALIBRATION" is set to "ON"
(default setting:
tape condition for about seven seconds, then
starts recording. This means that the first seven
seconds of the program will not be recorded. If
this is inconvenient for you, follow the steps
below:
1 Press [REC ( ¶ )] and [PAUSE ( 8 )] to start
Video Calibration.
2 Then press [PLAY ( 3 )] to start recording
after Video Calibration is complete.
It may be unlawful to record or play back
copyrighted material without the consent of the
copyright owner.
pg. 36), this VCR checks the
To pause recording
Press [PAUSE ( 8 )]. To resume recording, press
[PLAY ( 3)].
To stop recording
Press [STOP ( 7 )] on the Remote or [STOP/EJECT ( 7
on the front panel.
To rewind the tape (when it is not running)
Press [REW ( 1 )].
To fast-forward the tape (when it is not running)
Press [FF ( ¡ )].
To eject the tape
Press [STOP/EJECT ( 7
0 )] on the front panel when the
/
tape is not running.
● You can also eject the cassette when the VCR is turned
off.
To turn off the VCR
Press [POWER].
Compatibility Of Cassettes And Recording Mode
Recording Mode
Cassette
D-VHS
D-VHS
Yes
S-VHS
No
VHS
No
* To record on the VHS cassette with S-VHS quality, use the
S-VHS ET function (
pg. 36).
NOTES:
● The D-VHS (MTP), S-VHS, S-VHS ET and VHS mode
recordings are possible with this VCR.
● To record in the D-VHS mode, use a D-VHS cassette.
● To record in the S-VHS/VHS mode, you can use a D-VHS,
S-VHS or VHS cassette.
In case i.LINK input has been selected ([D-VHS]
indicator lights up), use the following methods to
perform recording in S-VHS/VHS mode on D-VHS
tapes.
● To record in S-VHS mode on D-VHS tapes:
Press [D-VHS] to turn off the [D-VHS] indicator.
Then, set "S-VHS MODE" to "ON" (
VCR automatically switches to [L-1] input and
enables analog recording.
● To record in VHS mode on D-VHS tapes:
Press [D-VHS] to turn off the [D-VHS] indicator.
Then, set "S-VHS MODE" to "OFF" (
VCR automatically switches to [L-1] input and
enables analog recording.
RECORDING (cont.)
0 )]
/
S-VHS
VHS
Yes
Yes
Yes
Yes
Yes*
Yes
pg. 38). The
pg. 38). The
Advertisement
Table of Contents
