Table of Contents
Advertisement
RECORDING
Basic
Recording
● Turn on the TV (and/or Digital Set Top Box), and
select the channel to be recorded.
● Set the [VCR/TV/CABLE/DBS] selector on the
Remote to [VCR].
CASSETTE
[POWER]
LOADING
IN F-1
VCR
CABLE
TV
/DBS
'Number' Keys
1
4
7
[REW (1 )]
[REC (¶)]
[CHANNEL +/–]
+
[REC (¶)]
[STOP/EJECT (7/0)]
[POWER]
[TV/VCR
CH +/–]
2
3
[REC SPEED]
5
6
8
9
0
[PLAY ( 3 )]
[FF ( ¡ )]
[PAUSE ( 8 )]
[STOP ( 7 )]
This VCR can check the tape condition during recording
(and playback), and realizes the best possible pictures.
D-VHS Recording
1
Set up link between this VCR and the
Integrated HDTV or Digital Set Top Box
● Select i.LINK connection at the Integrated
HDTV or Digital Set Top Box. For details, refer
to the instruction manual of the Integrated
HDTV or Digital Set Top Box.
2
Load a D-VHS cassette
Make sure the record safety tab is intact. If not,
cover the hole with adhesive tape before inserting
the cassette.
3
Select recording channel (i.LINK input)
On the front panel:
Press [CHANNEL +] or [–] to select "I-1" etc.
On the Remote:
Press [TV/VCR CH +] or [–] to select "I-1" etc.
● Set "LINC" to "AUTO". (
● Confirm that a link has been established
between this VCR and the Integrated HDTV or
the Digital Set Top Box.
● The [D-VHS] indicator on the front display
panel lights up and the D-VHS recording mode
is enabled.
4
Set recording speed
Press [REC SPEED] to set the recording speed.
● The recording speed changes each time
[REC SPEED] is pressed.
"AUTO" : When recording in HS or STD mode
is selected automatically according to
the amount of data input (transfer
rate) of the program.
"HS"
: When picture quality and sound
quality is important.
"STD"
: When picture quality and recording
time are important.
5
Start recording
On the front panel:
Press [REC ( ¶ )].
On the Remote:
While holding [REC ( ¶ )], press [PLAY ( 3 )].
23
EN
pg. 40)
Advertisement
Table of Contents
